TM-9-2815-205-24
6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L
TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE
FEBRUARY 2013
TM-9-2815-205-24 - Page 376 of 856
REMOVAL
NOTE
Three air inlet housing screws were removed during removal of fuel line clip and air
pump bracket.
1.
Remove nine screws (Figure 1, Item 3), nine lockwashers (Figure 1, Item 4), angle bracket
(Figure 1, Item 2), air inlet housing (Figure 1, Item 5), and screen (Figure 1, Item 7) from blower
(Figure 1, Item 8). Discard screen and lockwashers.
2.
If necessary, remove plug (Figure 1, Item 1) and plug (Figure 1, Item 6) from air inlet housing
(Figure 1, Item 5).
3
4
5
7
3
4
1
8
6
2
MAINT_162
Figure 1.
Air Inlet Housing Removal/Installation.
END OF TASK
TM 9-2815-205-24
0057
0057-2
Back to Top
