TM 9-2815-205-34
3-49. END PLATE REPLACEMENT (Cont)
d. Assembly
If screw inserts (7) were removed, support end plate (3) on flat surface and press screw inserts into
plate from front until insert seats on end plate.
e. Installation
(1)
(2)
(3)
Install gasket (6) on rear of cylinder block using gasket adhesive.
Apply a coat of gasket adhesive to outer surface of gasket (6).
Align holes in end plate (3) with dowels (8) in cylinder block. Push
block.
end plate against cylinder
(4)
Install ten lockwashers (5) and ten screws (4). Torque screws to 30-35 Ib-ft (41-47 N·m).
Para
3-48
3-47
3-44
3-40
3-33
3-28
3-29
3-23
3- 5
3- 6
3-3
Description
Install camshafts, camshaft gears, and idler gear.
Install fuel pump and hydraulic pump drive assemblies.
Install flywheel housing.
Install flywheel assembly.
Install oil pan.
Install tachometer drive (models 5063-5299, 5063-5392, 5063-5393, 5063-539F, and
5063-539L).
Install tachometer drive (models 5063-5395 and 5063-5398).
Install fuel pump.
Install turbocharger mounting bracket and exhaust tubes (models 5063-5393 and 5063-539L).
Install turbocharger mounting bracket and exhaust tubes (models 5063-5395, 5063-5398,
and 5063-539F).
Install turbocharger (models 5063-5393, 5063-5395, 5063-5398, 5063-539F, and 5063-539L).
3-176
Change 1