TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992

TM-9-2815-205-34 - Page 301 of 596

TM 9-2815-205-34

3-48. CAMSHAFTS, CAMSHAFT GEARS, AND IDLER GEAR REPLACEMENT (Cont)

(16) 0n model 5063-5398, install dirt deflector

(16) to front of each camshaft.

(17) Using a magnetic base dial indicator (34),

measure backlash between mating gears.

Backlash should be 0.0005 to 0.005 inch

with new gears and a maximum of 0.007

inch with used gears.

END OF TASK

FOLLOW-ON MAINTENANCE

3-47

3-46

3-43

3-40

3-44

3-39

3-10

3-11

Install fuel pump and hydraulic pump drive assemblies.

Install upper front cover.

Install cylinder heads.

Install flywheel assembly.

Install flywheel housing.

Install fan support bracket (model 5063-5392).

Install air box heater hardware (models 5063-5299, 5063-5395, 5063-5398, and 5063-539F).

Install air box heater hardware (model 5063-5392).

Install air box heater hardware (models 5063-5393 and 5063-539L).

Install air box heater.

3-1 2

3-13

3-172

Change 1