TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 165 of 968

TM 9-2815-210-34-2-2

b .

Inspection and Repair.

FRAME 1

1.

2.

3.

4.

5.

Check that oil gage rod support (1) is not bent or cracked and does not have

damaged threads.

Fix minor thread damage with a thread chaser. If more

repair is needed, get a new oil gage rod support.

Check that oil gage rod (2) is not bent or cracked and does not have damaged

threads. If oil gage rod is bent, cracked or has damaged threads, get a new

one .

Check that support bracket (3) is not cracked or bent. If it is, get a new one.

Check that screw (4), nut (5), and washer (6) are not damaged. If any part

is damaged, get a new one.

Put preformed packing (7) on oil gage rod (2) and slide it all the way up.

END OF TASK

4-146