TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

  TM-9-2815-210-34-2-2 - Page 162 of 968

TM 9-2815-210-34-2-2
4-14. COOLANT DRAIN COCK AND OIL PRESSURE TRANSMITTER.
a .
Cleaning.
FRAME 1
WARNING
Dry cleaning solvent is flammable. Do not use near
an open flame.
Keep a fire extinguisher nearby
when solvent is used,
Use only in well-ventilated
places. Failure to do this may result in injury to
personnel and damage to equipment.
1.
Clean oil pressure transmitter (1) with dry cleaning solvent. Dry with clean
cloth.
2.
Clean pipe adapter (2), drain cock (3), and two elbows (4) with brass wire
probe.
3.
Wash pipe adapter (2), drain cock (3), and
dry cleaning solvent.
WARNING
two elbows (4) by flushing with
Eye shields must be worn when using compressed air.
Eye injury can occur if eye shields are not used.
4.
Dry pipe adapter (2), drain cock (3), and two elbows (4) by blowing them out
with dry, compressed air.
END OF TASK
4-143


Back to Top