TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 153 of 968

TM 9-2815-210-34-2-2

4-8.

CRANKSHAFT REAR OIL SEAL HOUSING.

a. Cleaning. There are no special cleaning procedures needed. Refer to

cleaning procedures given in para 4-3.

b .

Inspection and Repair.

FRAME 1

WARNING

Dry cleaning solvent is flammable. Do not use near

an open flame.

Keep a fire extinguisher nearby when

solvent is used. Use only in well-ventilated places.

Failure to do this may result in injury to personnel

and damage to equipment.

1.

Check that rear oil seal housing (1) has no nicks, burrs, scratches or cracks.

Take out minor nicks, burrs or scratches with a fine mill file or crocus cloth

dipped in dry cleaning solvent.

If more repair is needed get a new part.

GO TO FRAME 2

4-134