TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 146 of 968

TM 9-2815-210-34-2-2

FRAME 2

1. If expansion plugs (1 or 2) were taken out, coat new expansion plugs with

sealer. Then knock in new expansion plugs using mallet and short brass rod

until expansion plugs are about 1/8 inch below surface of crankcase (3).

2. Put in six pipe plugs (4).

GO TO FRAME 3

4-127