TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 151 of 968

TM 9-2815-210-34-2-2

FRAME 2

1.

2.

3.

Check that piston rings (1) are not scuffed, scored, chipped or have chrome

plating worn through to bare metal. Check closely those rings that may have

been sticking in ring grooves.

If any rings are damaged in any way, get new

ones.

WARNING

Dry cleaning solvent is flammable. Do not use near an

open flame.

Keep a fire extinguisher nearby when sol-

vent is used.

Use only in well-ventilated places. Fail-

ure to do this may result in injury to personnel and

damage to equipment.

Check that piston pin (2) is not cracked, nicked or scratched. Fix minor

damage with a fine mill file or crocus cloth dipped in solvent. If more repair

is needed on any pin, get a new one.

Check that retainer rings (3) are not cracked or bent. If any retainer ring

is damaged in any way, get a new one.

GO TO FRAME 3

4-132