TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 150 of 968

TM 9-2815-210-34-2-2

b .

Inspection and Repair.

FRAME 1

1.

2.

3.

Check that pistons (1) are not burned, scored, scuffed or have any broken

ring grooves, deep scratches or signs of metal pick-up. If any piston has

such damage, get a new one.

Check that spherical combustion chamber (2) of piston (1) is not burned or

distorted and does not have cracks that are more than 0.020 inch wide or

5/16 inch in length.

Fix minor damage with a fine mill file. If more repair

is needed, get a new piston.

Check that piston pin bore (3) measurement is between 1.6251 and 1.6263

inches. If piston pin bore is oversized, get a new piston.

GO TO FRAME 2

4-131