TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 142 of 968

TM 9-2815-210-34-2-2

FRAME 3

very carefully.

1.

2.

G o

CAUTION

Cylinder sleeves (1) are easy to break. Handle them

NOTE

Y-size cylinder sleeves (1) are marked with the letter

“Y” on outside of sleeve about one inch below top of

sleeve. Z-size cylinder sleeves (1) are marked with

the letter “Z” on outside of sleeve about one inch be-

low top of sleeve.

Get new cylinder sleeves (1) for old cylinder sleeves thrown away during

preparation of crankcase for cleaning.

Get Y-size cylinder sleeves for Y-size

cylinder bores (2).

Get Z-size cylinder sleeves for Z-size cylinder bores (2).

Check that six cylinder sleeves (1) are not cracked, nicked, scratched or

scored.

Check that six cylinder sleeves have no small bits of metal stuck

in surface.

If any cylinder sleeve is cracked, nicked, scratched or scored

or has small bits of metal stuck in surface, throw it away and get a new one.

TO FRAME 4

4-123