TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 136 of 968

TM 9-2815-210-34-2-2

FRAME 14

NOTE

Readings must be within limits given in table 4-26. If

readings are not within given limits, throw away part

and get a new one.

1.

Subtract measurement of outside diameter of front intermediate camshaft

journal (1) noted in step 3 of frame 7 from measurement of inside diameter

of front intermediate camshaft bearing (2) noted in step 3 of frame 9.

2.

Subtract measurement of outside diameter of front camshaft journal (3) noted

in step 4 of frame 7 from measurement of inside diameter of front camshaft

bearing (4) noted in step 4 of frame 9.

END OF TASK

Table 4-26. Front Camshaft Journals and Camshaft Bearings Wear Limits

Index

Number

1 and 2

3 and 4

Item/Point of Measurement

Fit of front intermediate camshaft

journal in front intermediate

camshaft bearing

Fit of front camshaft journal in

front camshaft bearing

Size and Fit

of New Parts

(inches)

0.0020 to 0.0040

0.0020 to 0.0040

Wear Limit

(inches)

0.0060 max

0.0060 max

4-117