TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 129 of 968

TM 9-2815-210-34-2-2

FRAME 7

NOTE

Readings must be within limits given in

If readings are not within given limits,

part and get a new one.

If camshaft is thrown away, do steps 1

again for new camshaft.

table 4-22.

throw away

through 4

1.

Measure outside diameter of rear camshaft journal (1). Note this measurement.

2.

Measure outside diameter of rear intermediate camshaft journal (2). Note

this measurement.

3.

Measure outside diameter of front

this measurement.

4.

Measure outside diameter of front

GO TO FRAME 8

intermediate camshaft journal (3). Note

camshaft journal (4).

Note this measurement.

Index

Number

1

2

3

4

Table 4-22. Camshaft Journals Wear Limits

Item/Point of Measurement

Rear camshaft journal outside

diameter

Rear intermediate camshaft

journal outside diameter

Front intermediate camshaft

journal outside diameter

Front camshaft journal

outside diameter

Size and Fit

of New Parts

(inches)

1.9410 to 1.9920

2.3035 to 2.3045

2.3660 to 2.3670

2.4285 to 2.4295

Wear Limit

(inches)

1.9890

2.3015

2.3640

2.4265

4-110