TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 131 of 968

TM 9-2815-210-34-2-2

FRAME 9

1.

2.

3.

4.

NOTE

Readings must be within limits given in table 4-23.

If readings are more than given limits, take out all

four camshaft bearings (1 to 4) using camshaft bushing

remover and replacer kit. Then go to frame 10.

Measure inside diameter of camshaft rear bearing (1). Note measurement.

Measure inside diameter of camshaft rear intermediate camshaft bearing (2).

Note measurement.

Measure inside diameter of camshaft front intermediate camshaft bearing (3).

Note measurement.

Measure inside diameter of camshaft front bearing (4). Note measurement.

GO TO FRAME 13

Index

Number

1

2

3

4

Table 4-23. Camshaft Bearing Wear Limits

Item/Point of Measurement

Camshaft rear

diameter

Camshaft rear

bearing inside

bearing inside

intermediate

diameter

Camshaft front intermediate

bearing inside diameter

Camshaft front bearing inside

diameter

Size and Fit

of New Parts

(inches)

1.9940 to 1.9950

2.3065 to 2.3075

2.3690 to 2.3700

2.4315 to 2.4325

Wear Limit

(inches)

1.9970

2.3095

2.3720

2.4345

4-112