TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 130 of 968

TM 9-2815-210-34-2-2

FRAME 8

1.

2.

3.

4.

CAUTION

An oil transfer liner (1) is found in crankcase web (2).

It is there to pipe oil through crankcase web into main

oil gallery in crankcase (3). Do not take out this oil

transfer liner.

Check that rear camshaft bearing (4), rear intermediate camshaft bearing (5),

front intermediate camshaft bearing (6), and front camshaft bearing (7) are

not pitted or worn or discolored from overheating.

If any camshaft bearing (4, 5, 6, or 7) is pitted or worn or discolored from

overheating, take them all out using camshaft bushing remover and replacer

kit. Then go to frame 10.

Check that rear camshaft bearing (4), rear intermediate camshaft bearing (5),

front intermediate camshaft bearing (6), and front camshaft bearing (7) have

no nicks, burrs or cracks.

If any camshaft bearing (4, 5, 6, or 7) has nicks, burrs or cracks, take

them all out using camshaft bushing remover and replacer kit. Then go to

frame 10.

GO TO FRAME 9

4-111