TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 132 of 968

TM 9-2815-210-34-2-2

FRAME 10

NOTE

Readings must be within limits given in table 4-24.

If readings are not within given limits, throw away

crankcase (1) and get a new one.

If crankcase (1) is thrown away, get a new camshaft

bearing kit.

New crankcase does not come with cam-

shaft bearings.

1.

2.

3.

4.

Measure camshaft

Measure camshaft

Measure camshaft

Measure camshaft

rear bearing bore (2).

rear intermediate bearing bore (3).

front intermediate bearing bore (4).

front bearing bore (5).

GO TO FRAME 11

Index

Number

2

3

4

5

Table 4-24. Camshaft Bearing Bore Wear Limits

Item/Point of Measurement

Camshaft rear bearing bore inside

diameter

Camshaft rear intermediate

bearing bore inside diameter

Camshaft front intermediate

bearing bore inside diameter

Camshaft front bearing bore

inside diameter

Size and Fit

of New Parts

(inches)

2.1245 to 2.1255

2.4270 to 2.4280

2.4995 to 2.5005

2.5620 to 2.5630

Wear Limit

(inches)

None

None

None

None

4-113