TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 135 of 968

TM 9-2815-210-34-2-2

FRAME 13

1.

2.

Subtract

in step 1

NOTE

Readings must be within limits given in table 4-25. If

readings are not within given limits, throw away part

and get a new one.

measurement of outside diameter of rear camshaft journal (1) noted

of frame 7 from measurement of inside diameter of rear camshaft

bearing (2) noted in step 1 of frame 9.

Subtract measurement of outside diameter of rear intermediate camshaft

journal (3) noted in step 2 of frame 7 from measurement of inside diameter

of rear intermediate camshaft bearing (4) noted in step 2 of frame 9.

GO TO FRAME 14

Table 4-25. Rear Camshaft Journals and Camshaft Bearings Wear Limits

Index

Number

1 and 2

3 and 4

Item/Point of Measurement

Fit of rear camshaft journal in

rear camshaft bearing

Fit of rear intermediate camshaft

journal in rear intermediate

camshaft bearing

Size and Fit

of New Parts

(inches)

0.0020 to 0.0040

0.0020 to 0.0040

Wear Limit

(inches)

0.0060 max

0.0060 max

4-116