TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 147 of 968

TM 9-2815-210-34-2-2

FRAME 3

1.

If expansion plugs (1, 2, or 3) were taken out, coat new expansion plugs

with sealer.

Then knock in new expansion plugs using mallet and short

brass rod until they are about 1/8 inch below surface of crankcase (4).

2. Put in five pipe plugs (5).

END OF TASK

4-128