TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 156 of 968

TM 9-2815-210-34-2-2

4-9.

AIR COMPRESSOR SUPPORT.

a.

Clesning.

FRAME 1

1.

Unscrew and takeout pipe plug (1).

.

WARNING

Dry cleaning solvent is flammable. Do not use near

an open flame.

Keep a fire extinguisher nearby when

solvent is used.

Use only in well-ventilated places.

Failure to do this may result in injury to personnel and

damage to equipment.

2.

Clean support (2) with dry cleaning solvent. Dry with clean cloth.

3.

Clean oil passages (3) with a brass wire probe.

4. Wash oil passages (3) by flushing with dry cleaning solvent.

WARNING

Eye shields must be worn when using compressed air.

Eye injury can occur if eye shields are not used.

5.

Dry oil passages (3) by blowing them out with dry, compressed air.

END OF TASK

4-137