TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 149 of 968

TM 9-2815-210-34-2-2

1.

Clean carbon from cavity (1) in piston heads. Use crocus cloth.

WARNING

Dry cleaning solvent is flammable. Do not use near

an open flame.

Keep a fire extinguisher nearby when

solvent is used.

Use only in well-ventilated places.

Failure to do this may result in injury to personnel

and damage to equipment.

2.

Clean carbon from piston pins (2) and bore (3). Use crocus cloth dipped in

dry cleaning solvent.

3.

Clean connecting rod bearing halves (4) and pin spring (5), Use cloth

dipped in dry cleaning solvent.

Do not take off bearing identification marking.

4.

Clean connecting rod piston pin bearing sleeve (6). Use crocus cloth dipped

in dry cleaning solvent.

5.

Clean connecting rod (7) and connecting rod cap (8). Refer to para 4-3.

END OF TASK

4-130