TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 167 of 968

TM 9-2815-210-34-2-2

b. Cleaning. There are no special cleaning procedures needed. Refer to

cleaning procedures given in para 4-3.

c .

Inspection and Repair.

FRAME 1

1.

Check that 30 screws (1) are not stripped or damaged in any other way. If

any screw is damaged, get a new one.

Check that 30 lockwashers (2) are

not chipped, cracked, or bent.

If any lockwasher is damaged, get a new one.

2.

Check that two drain plugs (3) are not stripped or damaged in any other

way.

Fix minor thread damage with a thread chaser. If more repair is needed,

get a new drain plug.

3.

If working on engine LDS-465-1, check that drain plug (4) or fuel injection

pump oil drain elbow (5) are not stripped or damaged in any other way. Fix

minor thread damage with a thread chaser.

If more repairs are needed, get a

new part.

GO TO FRAME 2

4-14 8