TM 9-2815-210-34-2-2
FRAME 2
1.
2.
3.
4.
5.
Check that oil drain hose (1) is not torn, cracked, dried out or damaged in
any way.
If oil drain hose is damaged, get a new one.
Check that oil drain tube (2) and pipe-to-hose adapter (3) are not bent,
dented or cracked and have no minor nicks or burrs. Take out minor nicks or
burrs with a fine mill file.
If more repair is needed, get a new part.
Check that four screws (4) are not stripped, crossthreaded or damaged in
any other way.
If repair is needed, get a new screw.
Check that four lockwashers (5) are not chipped or cracked. If any lock-
washer is damaged, get a new one.
Check that oil inlet adapter (6) is not bent, cracked or damaged in any other
way.
If oil inlet adapter is damaged, get a new one.
END OF TASK
4-436