TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 453 of 968

TM 9-2815-210-34-2-2

FRAME 2

1.

2.

WARNING

Dry cleaning solvent is flammable. Do not use near an

open flame.

Keep a fire extinguisher nearby when

solvent is used.

Use only in well-ventilated places.

Failure to do this may result in injury to personnel and

damage to equipment.

Eye shields must be worn when using compressed air.

Eye injury can occur if eye shields are not used.

Clean inside of oil inlet tube (1), oil inlet adapter (2), oil drain tube (3), and

oil drain hose-to-pipe adapter (4) with brass wire probes. Flush with dry

cleaning solvent.

Blow dry with compressed air.

Clean outside of oil inlet tube (1), oil inlet adapter (2), oil drain tube (3) and

oil drain hose-to-pipe adapter (4) with dry cleaning solvent. Dry with clean

cloth .

END OF TASK

4-434