TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 452 of 968

TM 9-2815-210-34-2-2

4-46. TURBOCHARGER OIL DRAIN HOSE, OIL DRAIN AND INLET TUBES, AND

RELATED PARTS (ENGINES LDT-465-1C, LDS-465-1, LDS-465-1A, AND

LDS-465-2).

a.

Cleaning.

FRAME 1

1.

2.

3.

Take two hose clamps (1) off oil drain hose (2).

Clean oil

CAUTION

Do not let dry cleaning solvent touch oil drain hose

(2). Hose will dry out, rot and need replacement.

If dry cleaning solvent splashes on hose, dry with

clean cloth.

drain hose (2) with soapy water. Dry with clean cloth.

WARNING

Dry cleaning solvent is flammable. Do not use near

an open flame.

Keep a fire extinguisher nearby when

solvent is used.

Use only in well-ventilated places.

Failure to do this may result in injury to personnel

and damage to equipment.

Clean two hose clamps (1), four screws (3), and four Iockwashers (4) with dry

cleaning solvent.

Let parts air dry.

GO TO FRAME 2

4-433