TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 461 of 968

TM 9-2815-210-34-2-2

4-48. INTAKE MANIFOLD ELBOW ASSEMBLY.

NOTE

There are two different configurations of intake

manifold elbow assemblies.

Elbow assembly used

on engines LDS-465-1A, LDS-465-2, LD-465-1

and LD-465-1C is shown. This task is the same

for elbow assembly used on engine LDT-465-1C.

a.

Cleaning.

FRAME 1

WARNING

Dry cleaning solvent is flammable. Do not use near

an open flame.

Keep a fire extinguisher nearby when

solvent is used.

Use only in well-ventilated places.

Failure to do this may result in injury to personnel

and damage to equipment.

1.

Wash inner and outer surfaces of intake manifold assembly elbow (1) with dry

cleaning solvent.

Dry with lint-free cloth.

END OF TASK

4-442