TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 470 of 968

TM 9-2815-210-34-2-2

Table 4-62.

Air Compressor Pulley Pins, Hub, and Sleeve-Type Bearings

(Engine LDS-465-2) Wear Limits

Index

Size and Fit

Number

Item /Point of Measurement

of New Parts

Wear Limits

(inches)

(inches)

1

Outside diameter of retaining

pin

0.4985 to 0.4990

0.4960

2

Inside diameter of retaining

pin bore

0.4975 to 0.4980

None

1 and 2

Fit of retaining pin in pulley

0.0005T to 0.0015T

None

4

Inside diameter of bore in pulley

0.5934 to 0.5941

None

6

Outside diameter of sleeve

bearing

0.5934 to 0.5941

None

6

Inside diameter of sleeve

bearing

0.5060

1 and 6

Fit of retaining pin in bearing

sleeve

0.0100

4-451