TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 473 of 968

TM 9-2815-210-34-2-2

FRAME 2

1.

2.

3.

NOTE

Some air compressor pulley halves (1) have keyway

for woodruff key (2) and some do not.

Look in bore of air compressor pulley half (1) for keyway for woodruff key

(2). If pulley half has keyway, put woodruff key in slot in compressor shaft

(3). If it does not, make sure there is no woodruff key in shaft.

Slide pulley half (1) onto compressor shaft (3).

NOTE

If pulley half (1) has keyway in pulley half, it must

line up with woodruff key (2) in compressor shaft (3).

Screw self-locking nut (4) on compressor shaft (3) and using torque wrench

tighten to 100 pound-feet.

GO TO FRAME 3

4-454