TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 472 of 968

TM 9-2815-210-34-2-2

(4) Assembly and replacement.

NOTE

For engine LDS-465-2, go to frame 4. For all

other engines, go to frame 1.

FRAME 1

1.

2.

NOTE

Replacement air compressors are fitted with protective

cover (3), cover gasket (4), and slotted nut (5).

If putting on a replacement compressor, do steps 1 and 2.

If putting on used compressor, go to frame 2.

Take off four push-on nuts (1) and rivets (2) and take off protective cover

(3) and gasket (4).

Throw away nuts, rivets, cover, and gasket.

Take off and throw away slotted nut (5).

NOTE

Self-locking nut taken off during disassembly will be

used instead of slotted nut (5).

GO TO FRAME 2

4-453