TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 466 of 968

TM 9-2815-210-34-2-2

FRAME 4

CAUTION

1.

2.

3.

Pulley assembly (2) has a very strong spring (6)

inside.

Take off pressure from vise (1) or arbor

press slowly or assembly will fly apart and parts

will be lost.

Work vise (1) or arbor press to let pressure off pulley assembly (2) and take

apart inside pulley half (3), outside pulley half (4),

spring retainer (5),

spring (6), and four retainer pins (7).

Pry out seals (8 and 9) from outside pulley half (4).

Using arbor press, press out four sleeve bearings (10).

END OF TASK

4-447