TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 457 of 968

TM 9-2815-210-34-2-2

b. Cleaning. There are no special cleaning procedures needed. Refer to

cleaning procedures given in para 4-3.

c .

Inspection and Repair.

FRAME 1

1.

2.

3.

4.

NOTE

If working on model with exhaust elbow (1), do steps 1

through 4.

If working on model with exhaust adapter

(2), go to frame 3.

Check that exhaust elbow (1) has no cracks, holes or burned areas. If it

does, get a new one.

Check that flanges of exhaust elbow (1) have no burned areas and are not

warped.

If flanges are damaged, get a new exhaust elbow.

Check that sections of expansion bellows (3) have not come apart. If

expansion bellows are damaged, get a new exhaust elbow (1).

Check that flanges of exhaust elbow (1) have no nicks or burrs. Take out

small nicks or burrs with a fine mill file.

If more repair is needed, get a new

exhaust elbow.

GO TO FRAME 2

4-438