TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 468 of 968

TM 9-2815-210-34-2-2

FRAME 2

1.

2.

WARNING

Dry cleaning solvent is flammable. Do not use near an

open flame.

Keep a fire extinguisher nearby when sol-

vent is used. Use only in well-ventilated places.

Failure to do this may result in injury to personnel and

damage to equipment.

Check that inside pulley half (1), outside pulley half (2), and spring retainer

(3) have no nicks, burrs, cracks or bends.

Fix minor damage with fine mill

file or crocus cloth dipped in dry cleaning solvent.

Check that oil seals (4 and 5) have no wear, cracks or cuts. If seals are

damaged, throw them away and get new ones.

GO TO FRAME 3

4-449