TM 9-2815-210-34-2-2
c .
Repair.
(1) Repair minor damage to ignition unit by filing burrs on threads.
(2) If damage cannot be repaired, throw unit away
4-66. FLAME HEATER FUEL PUMP (COVERED SYSTEM).
a. Cleaning.
FRAME 1
and get a new one.
1.
2.
3.
Cap electrical receptacle connection (1).
Plug fuel inlet (2) and outlet (3) ports.
WARNING
Dry cleaning solvent is flammable. Do not use near an
open flame. Keep a fire extinguisher nearby when sol-
vent is used. Use only in well-ventilated places. Fail-
ure to do this may result in injury to personnel and
damage to equipment.
CAUTION
Fuel pump should not be dipped in cleaning solvent.
Electrical parts can be damaged.
Clean fuel pump with cloth dipped in dry cleaning solvent.
END OF TASK
4-553