TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 581 of 968

TM 9-2815-210-34-2-2

FRAME 2

NOTE

This is an alternate procedure given for reference

purposes only.

Standard procedure is to test flame

heater nozzle during dynamometer test and

adjustment.

1.

Hook up hose (1) from supply (2) of diesel fuel to pump inlet (3).

2.

Hook up hose (4) from pump outlet (5) to pressure gage (6).

3.

Hook up adjustable valve (7) from pressure gage (6).

4.

Hook up hose (8) from adjustable valve (7) to nozzle and check valve assembly

(9) inlet opening (10).

GO TO FRAME 3

4-562