TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 589 of 968

TM 9-2815-210-34-2-2

FRAME 2

1.

Check that 1/4-inch plastic tubing (1) has not shrunk at tube nut ferrules (2).

2.

Throw away 1/4-inch plastic tubing (1) if no. 28 drill shank (3) cannot be put

in tubing opening.

3. Check that 1/8-inch plastic tubing (4) has not shrunk at tube nut ferrule (5).

4.

Throw away 1/8-inch plastic tubing if 1/32-inch drill shank (6) cannot be put

in tubing opening.

GO TO FRAME 3

4-570