TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 587 of 968

TM 9-2815-210-34-2-2

4-69. FLAME HEATER TUBES, CLAMPS, AND FITTINGS (COVERED SYSTEM).

a .

Cleaning.

FRAME 1

1.

2.

3.

4.

5.

Clean plastic tubing (1) with soap and water.

WARNING

Dry cleaning solvent is flammable. Do not use near an

open flame. Keep a fire extinguisher nearby when sol-

vent is used.

Use only in well-ventilated places. Fail-

ure to do this may result in injury to personnel and

damage to equipment.

Clean elbows (2) with dry cleaning solvent.

Clean connectors (3) with dry cleaning solvent.

Clean loop clamps (4) with dry cleaning solvent if they are uncoated or with

soap and water if they are coated.

Clean spring clamps (5) with dry cleaning solvent if they are uncoated or

soap and water if the are coated.

END OF TASK

4-568