TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 578 of 968

TM 9-2815-210-34-2-2

4-68. FLAME HEATER NOZZLE AND VALVE ASSEMBLY (COVERED SYSTEM).

a.

Cleaning and Inspection.

FRAME 1

1.

2.

3.

4.

Plug fuel inlet (1) and outlet (2) openings with pipe plugs.

WARNING

Dry cleaning solvent is flammable. Do not use near an

open flame.

Keep a fire extinguisher nearby when sol-

vent is used.

Use only in well-ventilated places. Fail-

ure to do this may result in injury to personnel and

damage to equipment.

Clean nozzle and valve assembly (3) with dry cleaning solvent. Take off heavy

carbon deposits with a stiff brush.

Check that nozzle and valve assembly

are not crossthreaded.

Check that nozzle and valve assembly

new nozzle and valve assembly if it is

END OF TASK

fuel inlet (1) and fuel outlet (2) threads

(3) is not cracked or damaged. Get a

cracked or damaged.

4-559