TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 592 of 968

TM 9-2815-210-34-2-2

4-70. FLAME HEATER COVER AND BRACKET (COVERED SYSTEM).

a.

Cleaning and Inspection.

FRAME 1

WARNING

1.

2.

3.

4.

5

0

6.

7.

Dry cleaning solvent is flammable. Do not use near an

open flame.

Keep a fire extinguisher nearby when sol-

vent is used.

Use only in w en-ventilated places. Fail-

ure to do this may result in injury to personnel and

damage to equipment.

Clean access cover (1) with dry cleaning solvent.

Clean support bracket assembly (2) with soap and water.

Check that

Check that

Check that

Check that

access cover (1) is not cracked, dented or bent.

bracket assembly (2) is not cracked or damaged.

clip-on nut (3) is not damaged or that threads are not stripped.

clip-on nuts (3) fit tightly on bracket (2).

Throw away any part that is cracked or damaged and get a new one.

END OF TASK

4-573