TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 599 of 968

TM 9-2815-210-34-2-2

FRAME 2

1.

Place inlet solenoid valve (1) on flame heater bracket (2).

2.

Aline holes and put in two lockwashers (3) and machine screws (4).

3.

Tighten machine screws (4).

4.

Place return solenoid (5) on flame heater bracket (2).

5.

Aline holes and put in two lockwashers (6) and machine screws (7).

6.

Tighten machine screws (7).

7.

Put fuel tube (8) in place and tighten two tube nuts (9).

END OF TASK

4-580