TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 596 of 968

TM 9-2815-210-34-2-2

b. Cleaning .

(1) Check that all openings in solenoid valves are plugged.

WARNING

Dry cleaning solvent is flammable. Do not use

near an open flame.

Keep a fire extinguisher

nearby when solvent is used. Use only in well-

ventilated places.

Failure to do this may result

in injury to personnel and damage to equipment.

CAUTION

Do not dip solenoid valves in dry cleaning solvent.

Damage to parts inside solenoid valves will result.

(2) Clean outside of solenoid valves using cloth dipped in dry cleaning

solvent.

(3) Remove cap plugs from fuel line openings.

c .

Inspection.

FRAME 1

1.

Check that solenoid valves (1) are not cracked or dented. Get a new valve

if cracked or dented.

2.

Check that threads in inlet (2) and outlet (3) are not stripped.

3.

Check that threads on electrical connector (4) are not stripped.

GO TO FRAME 2

4-577