TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 676 of 968

TM 9-2815-210-34-2-2

5-10. OIL PUMP ASSEMBLY, OIL PUMP TUBES, AND OIL PAN.

a.

Oil Pump Assembly.

NOTE

The oil pump for engine LDS-465-2 looks differ-

ent than oil pump for other engines. This task

is the same for all oil pumps.

1.

Put oil pump (1) on dowels in front bearing cap (2).

2.

Mesh gear teeth of oil pump drive gear (3) with teeth of oil pump idler

gear (4).

3.

Put in three self-locking bolts (5).

Tighten bolts to 48 to 58 pound-feet.

GO TO FRAME 2

5-47