TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 670 of 968

TM 9-2815-210-34-2-2

FRAME 4

1.

Coat connecting rod bearing lower half (1) and bearing cap (2) with oil.

NOTE

Bearing caps (2) are numbered. Bearing cap number

must match and face the same way as connecting rod

number.

2.

Put bearing cap (2) in place on connecting rod (3). Put in two capscrews (4).

3.

Tighten capscrews (4) to 66 to 67 pound-feet.

4.

Tighten capscrews (4) to 95 to 100 pound-feet.

5.

Do step 2 of frame 1 and frames 2 through 4 again for the other five pistons.

END OF TASK

5-41