TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 662 of 968

TM 9-2815-210-34-2-2

FRAME 3

1.

Put crankshaft damper and pulley replacer (1) in end of crankshaft.

2.

Hold replacer bolt (2) and turn replacer nut (3) until end of crankshaft is

flush with end of damper pulley bore.

3.

Take out crankshaft damper and pulley replacer (1).

GO TO FRAME 4

5-33