TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 665 of 968

TM 9-2815-210-34-2-2

FRAME 6

1.

Slide damper and pulley (1) over pulley driver shaft (2).

2.

Put pulley driver support (3) and driver nut (4) on driver shaft (2).

3.

Tighten nut (4) until end of bore in damper and pulley (1) is even with

end of crankshaft.

4.

Take off crankshaft pulley driver assembly.

GO TO FRAME 7

5-3 6