TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 659 of 968

TM 9-2815-210-34-2-2

d .

Crankshaft Damper and Pulley Assembly.

NOTE

If working on engines other than LDS-465-2,

start with frame 1.

If working on engine

LDS-465-2, go to frame 4.

FRAME 1

1.

Coat lip of crankshaft front oil seal (1), crankshaft key (2), and damper

pulley assembly bearing area of crankshaft (3) with lubricating oil.

NOTE

Tell machine shop to make damper pulley locator (4).

See figure 5-1.

2.

Put on fabricated damper pulley locator (4). Aline locator with crankshaft

key (2).

3.

Put in pulley mounting bolt (5).

GO TO FRAME 2

5-3 0