TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 668 of 968

TM 9-2815-210-34-2-2

NOTE

Piston and connecting rod assemblies are numbered.

They must be put in cylinder with connecting rod num-

ber and piston combustion chamber swirl facing cam-

shaft side of cylinder block. The connecting rod and

piston is to be put in.

Cylinders are numbered one

through six from front to back of cylinder block.

1.

Turn four piston rings (1) on piston (2) so gaps (3) are 90° apart,

2.

Coat piston (2) with oil,

Coat inside of cylinder liner (4) with oil.

GO TO FRAME 3

5-39