TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 674 of 968

TM 9-2815-210-34-2-2

FRAME 3

WARNING

Eye shields must be worn when using compressed air.

Eye injury can occur if eye shields are not used.

1.

2.

3.

NOTE

Place drip pan under engine before air supply is turned

on. All six nozzles will have an oil stream but only one

can be adjusted at a time.

Leave air pressure on only

as long as needed to check nozzle adjustment.

Turn on air supply and check oil stream from piston cooling nozzle (1). Stream

must hit center of piston cooling port (2). Turn off air supply.

If cooling nozzle (1) adjustment is not correct, aim the nozzle and do step 1

again.

Do frames 2 and 3 again for other five cylinders.

GO TO FRAME 4

5-45