TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 678 of 968

TM 9-2815-210-34-2-2

b .

Oil Pump Tubes.

FRAME 1

1.

Put end of oil pump outlet tube assembly (1) in oil pump outlet (2). Seat

preformed packing (3) on top of oil pump outlet.

2.

Put gasket (4) on crankcase oil inlet (5).

Put tube assembly (1) on gasket.

3.

Put 1 1/4-inch long drilled head bolt (6) in oil pump side of crankcase oil

inlet (5) end of tube assembly (1).

4.

Put l-inch drilled head bolt (7) in outer side of crankcase end of tube assembly

(1) .

5.

Seat flange (8) on oil pump outlet (2).

Put in two cap screws (9) with lock-

washers (10).

GO TO FRAME 2

5-49