TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 671 of 968

TM 9-2815-210-34-2-2

b .

Piston Cooling Nozzles Adjustment (Engines LDS-465-1A and LDS-465-2).

FRAME 1

1.

2.

3.

4.

NOTE

Tell machine shop to make adapter with gasket (1).

See figure 5-2.

Use two oil pressure regulator valve adapter capscrews

(2) to hold adapter (1).

Put fabricated adapter with gasket (1) in place over nozzle gallery supply

hole.

Put in two capscrews (2).

Put oil supply line (3) on adapter (1). Put other end of oil supply line on

outlet side of oil pressure tank (4).

Fill oil pressure tank (4) with OE/HDO 10 engine oil.

NOTE

Air pressure supply must be set to 80 psi.

Hook oil pressure tank (4) to air pressure supply.

GO TO FRAME 2

5-42