TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 728 of 968

TM 9-2815-210-34-2-2

5-18. CYLINDER HEAD WATER OUTLET MANIFOLDS.

FRAME 1

1.

Coat six gaskets (1) with sealant. Put six gaskets (1) in place on two

cylinder heads (2).

2.

Put two hoses (3) on two water manifolds (4). Put on four hose clamps (5).

3.

Push two hoses (3) onto two intake manifold water ports (6) and put two water

outlet manifolds (4) in place on two cylinder heads (2).

NOTE

It may be necessary to take out three or five cap screws

(8) to mount flame heater components.

4.

Put oil filler cap retaining chain (7) in place. Put in 12 capscrews with lock-

washers (8).

Tighten four hose clamps (5).

END OF TASK

5-99