TM-9-2815-213-34
ENGINE, DIESEL, WITH ACCESSORIES CUMMINS MODEL V8-300 (2815-910-8217)
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING DIRECT SUPPORT AND GENERAL SUPPORT REPAIR PARTS LIST AND DEPOT MAINTENANCE ALLOWANCES)
FEBRUARY 1972
TM-9-2815-213-34 - Page 105 of 192
C 1,
TM 9-2815-213-34
APPENDIX B
REPAIR PARTS AND SPECIAL TOOLS LIST
Section I.
B-1.
Scope
This appendix lists the repair parts and specific tools
required for the performance of dire support and general
support maintenance of the V8-300 diesel engine.
B-2.
General.
This Repair Parts and Special Tools List divided into the
following sections:
a.
Section II.
Repair Parts List
.
A list of repair parts
authorized for use in the performance maintenance.
The
list also includes parts which must be removed for
replacement of the authorized parts.
Parts lists are
composed functional groups in ascending numeric,
sequence,
with the parts in each group listed figure and
item number sequence.
Bulk material are listed in NSN
sequence.
b.
Section III.
Special Tools,
Test and Support
Equipment
.
A list of special tools,
test at support
equipment
authorized
for
the
performance
of
maintenance at the direct support and general support
levels.
c.
Section IV.
National Stock Number and Part
Number Index
.
A list,
in ascending numerical sequence,
of all National stock numbers appearing in the listings,
followed by a list in alphameric sequence,
of all part
number appearing in the listings.
National stock numb,
and part numbers are cross-referenced to each
illustration figure and item number appearance This
index is followed by a cross-reference list reference
designations to figure and item number: when applicable.
B-3.
Explanation of Columns.
The following provides an explanation of columns found
in the tabular listings: a.
Illustration.
This column
is
divided follows:
(1)
Figure Number
.
Indicates the figure number
of the illustration in which the item shown.
(2)
Item
Number
.
The
number
used identify
each item called out in the illustration
b.
Source,
Maintenance,
and Recoverability Codes
(SMR ).
(1)
Source Code
.
Source codes are assigned to support
items to indicate the manner of acquiring support items
for maintenance,
repair,
or overhaul of end items.
Source codes are entered in the first and second
positions of the Uniform SMR Code format as follows:
Code
Definition
PA .
.... Item procured and stocked for anticipated or
known usage.
PB .
.... Item procured and stocked for insurance
purpose because essentially dictates that a minimum
quantity be available in the supply systems.
PC .
.... Item procured and stocked and which otherwise
would be coded PA except that it is deteriorate in nature.
PD .
.... Support
item,
excluding
support
equipment,
procured for initial issue or outfitting and stocked only for
subsequent or additional initial issues or outfittings.
Not
subject to automatic replenishment.
PE .
.... Support
equipment
procured
and
stocked for
initial issue or outfitting to specified maintenance repair
activities.
PF.
.....
Support equipment which will not be stocked but
which will be centrally procured on demand.
PG.
.... Item procured
and
stocked to provide for
sustained support for the life of the equipment.
It is
applied to item peculiar to the equipment which,
because of probable discontinuance or shutdown of
production facilities,
would prove uneconomical to
reproduce at a later time.
KD .
.... An item of a depot overhaul/repair kit and not
purchased separately.
Depot kit defined as a kit that
provides items required at the time of overhaul or repair.
KF.
.....
An item of a maintenance kit and not purchased
separately.
Maintenance kit defined as a kit that
provides an item that can be replaced at organizational
or intermediate levels of maintenance.
KB .
.... Item included in both a depot overhaul/repair kit
and a maintenance kit.
MO .
... Item
to be manufactured or fabricated at
organizational level.
MF.
.... Item to be manufactured or fabricated at the
direct support maintenance level.
MH.
.... Item to be manufactured or fabricated at the
general support maintenance level.
MD.
.... Item to be manufactured or fabricated at the
depot maintenance level.
AOItem to be assembled at organizational level.
AF.
.....
Item to be assembled
at
direct
support
maintenance level.
AH .
.... Item
to be
assembled
at general
support
maintenance level.
B-1
Back to Top
