TM-9-2815-220-24

AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL FOR AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

  TM-9-2815-220-24 - Page 337 of 1563

TM 9-2815-220-24
GENERATOR REPLACEMENT (650 AMPERE)
0051 00
INSTALLATION (Continued)
14. Install rear oil drain hose (19) to tee (20).
15. Install oil inlet hose (13) to inlet elbow (14) on generator (28).
16. Install oil outlet hose (17) to oil outlet fitting (18) on generator (28).
17. Install vent hose (15) to fitting (16) assuring that orifice fitting (42) is in place.
18. Install J1 and J2 electrical connectors (11, 12) to generator (28).
11
28
12
20
19
17
14
13
18
15
42
16
TEST
1. Setup for ground hop according to the appropriate manual for your application.
2. Start engine and check generator for proper operation.
Check that the Battery-Generator
indicator needle is in green zone.
3. Check generator oil lines, fittings, and drive adapter for oil leaks.
Correct leaks as required.
4. Disconnect from ground hop.
5. Coat all exposed generator terminals with Glyptal (MIL-E-22118) (item 13, WP 0173).
END OF WORK PACKAGE
WP 0051 00-15 (16 blank)


Back to Top